Top

Extruded Rolls of Semi Closed cell EPDM

EPSO X is the new generation at INTERFLEX !
INTERFLEX have developed in 2019 new solutions for the worldwide market and customers who were looking for a reliable new supplier of semi closed EPDM in continuous rolls and who would be holding a global range , allowing them not to change any habits they currently may have in either roll presentation – Length – packing or properties ..
Our global team focused then to manufacture foamed extruded EPDM which allow converters to continuously work their die cutting or kiss cutting gaskets , without facing any joint which creates an hard point each 2 meters.

Our high technical EPDM EPSO X foams comply with any highest standard for water impermeability – leakage – dust (under compression)

AT A COMPETITVE PRICE !

Our material can be supplied with multiple solutions for adhesive backing.

MOST POPULAR GRADES
(with basic properties)

EPSO XS 

  • 100 kg/m3 density (+/-20)
  • FMVSS 302
  • Compression Deflection : < 5 kPA at 25 %
  • Linear Shrinkage : < 2% (70°c / 4H)
  • Sealing properties : >1h / 70% compression
  • Available from 3 mm to 30 mm thick

EPSO XH 

  • 130 kg/m3 density (+/-20)
  • FMVSS 302
  • Compression Deflection < 6 kPA at 25%
  • Linear Shrinkage < 2% (70°c / 4H)
  • Sealing properties : >1h / 60% compression
  • Sealing properties : < 30mn / 50% compression
  • Available from 3 mm to 30 mm thick

EPSO XL 

  • 70 kg/m3 density (+/-20)
  • FMVSS 302
  • Compression Deflection : 2-4 kPA at 25 %
  • 110 kPA Tensile Strength
  • Available from 3 mm to 30 mm thick

Do not hesitate to check with our team for further solutions we also hold like EPSO XC and others that will soon be added to current range of EPSO X !
All technical data sheets available upon simple request

The original standard range, made in Blocks

EPSO made in block is the first generation of semi open cell solutions which we developed already 10 years ago , still much used by many companies and approved in various sectors and by almost every OEM.
Our production in blocks allow us to control the final cell aspects and define which kind of performance we will want to achieve.
Our softest grades will be dedicated for HVAC applications, with excellent acoustic performances and low VOC/TVOC rate.
And an especially very fast recovery & excellence in compression set !

Our higher density grades are oriented to different technical applications or water sealability.

INTERFLEX Standard EPSO Range is available from 60 kg/m3 material up to +300 kg/m3 material, which is only possible by making it in blocks.

The technology in blocks can give a better price advantage that extruded rolls in certain cases .
INTERFLEX is able to offer for some products thicknesses ranging from 3 mm up to 60 mm.

In Blocks – Sheets or Rolls also (with a joint each 2 meters)

MOST POPULAR GRADES
(with basic properties)

EPSO 12

  • 70 – 100 kg/m3 density
  • FMVSS 302
  • Compression Deflection 2-4 kPA at 25%
  • 1% Compression set, 50% – 22h at 23°C.
  • Excellent sound absorption at low frequencies (tested in Alpha Cabin)
  • Available in blocks – sheets – rolls

EPSO 80

  • 80 – 110 kg/m3 density
  • FMVSS 302
  • Compression Deflection 3-5 kPA at 25%
  • Compression set, 50% – 22h at 23°c : >5%
  • TL 52065 – TSK 6505G water leakage test : COMPLIANT
  • Available in blocks – sheets – rolls

EPSO 100

  • 100 – 130 kg/m3 density
  • FMVSS 302
  • Compression Deflection 4-6 kPA
  • 130 kPA tensile strength
  • -40 – 120 °c working temperature (+150°c intermittent)
  • Available in blocks or sheets

Do not hesitate to check with our team for further solution like EPSO 11, EPSO 150 grey, etc..
And soon, EPSO in a Sulphur Free version !

All the technical data sheet are available upon request

Extruded Rolls of Semi Closed cell EPDM

EPSO X is the new generation at INTERFLEX !
INTERFLEX have developed in 2019 new solutions for the worldwide market and customers who were looking for a reliable new supplier of semi closed EPDM in continuous rolls and who would be holding a global range , allowing them not to change any habits they currently may have in either roll presentation – Length – packing or properties ..
Our global team focused then to manufacture foamed extruded EPDM which allow converters to continuously work their die cutting or kiss cutting gaskets , without facing any joint which creates an hard point each 2 meters.

Our high technical EPDM EPSO X foams comply with any highest standard for water impermeability – leakage – dust (under compression)

AT A COMPETITVE PRICE !

Our material can be supplied with multiple solutions for adhesive backing.

MOST POPULAR GRADES
(with basic properties)

EPSO XS 

  • 100 kg/m3 density (+/-20)
  • FMVSS 302
  • Compression Deflection : < 5 kPA at 25 %
  • Linear Shrinkage : < 2% (70°c / 4H)
  • Sealing properties : >1h / 70% compression
  • Available from 3 mm to 30 mm thick

EPSO XH 

  • 130 kg/m3 density (+/-20)
  • FMVSS 302
  • Compression Deflection < 6 kPA at 25%
  • Linear Shrinkage < 2% (70°c / 4H)
  • Sealing properties : >1h / 60% compression
  • Sealing properties : < 30mn / 50% compression
  • Available from 3 mm to 30 mm thick

EPSO XL 

  • 70 kg/m3 density (+/-20)
  • FMVSS 302
  • Compression Deflection : 2-4 kPA at 25 %
  • 110 kPA Tensile Strength
  • Available from 3 mm to 30 mm thick

Do not hesitate to check with our team for further solutions we also hold like EPSO XC and others that will soon be added to current range of EPSO X !
All technical data sheets available upon simple request

The original standard range, made in Blocks

EPSO made in block is the first generation of semi open cell solutions which we developed already 10 years ago , still much used by many companies and approved in various sectors and by almost every OEM.
Our production in blocks allow us to control the final cell aspects and define which kind of performance we will want to achieve.
Our softest grades will be dedicated for HVAC applications, with excellent acoustic performances and low VOC/TVOC rate.
And an especially very fast recovery & excellence in compression set !

Our higher density grades are oriented to different technical applications or water sealability.

INTERFLEX Standard EPSO Range is available from 60 kg/m3 material up to +300 kg/m3 material, which is only possible by making it in blocks.

The technology in blocks can give a better price advantage that extruded rolls in certain cases .

INTERFLEX is able to offer for some products thicknesses ranging from 3 mm up to 60 mm.

In Blocks – Sheets or Rolls also (with a joint each 2 meters)

MOST POPULAR GRADES
(with basic properties)

EPSO 12

  • 70 – 100 kg/m3 density
  • FMVSS 302
  • Compression Deflection 2-4 kPA at 25%
  • 1% Compression set, 50% – 22h at 23°c.
  • Excellent sound absorption at low frequencies (tested in Alpha Cabin)
  • Available in blocks – sheets – rolls

EPSO 80

  • 80 – 110 kg/m3 density
  • FMVSS 302
  • Compression Deflection 3-5 kPA at 25%
  • Compression set, 50% – 22h at 23°c : >5%
  • TL 52065 – TSK 6505G water leakage test : COMPLIANT
  • Available in blocks – sheets – rolls

EPSO 100

  • 100 – 130 kg/m3 density
  • FMVSS 302
  • Compression Deflection 4-6 kPA
  • 130 kPA tensile strength
  • -40 – 120 °c working temperature (+150°c intermittent)
  • Available in blocks or sheets

Do not hesitate to check with our team for further solution like EPSO 11, EPSO 150 grey, etc..
And soon, EPSO in a Sulphur Free version !

All the technical data sheet are available upon request

By continuing to use the site, you accept the use of cookies. More information

The cookie settings on this site are set to "accept cookies" to provide you with the best possible browsing experience. If you continue to use this site without changing your cookie settings or if you click "Accept" below, you consent to this.

Close